Blog Feed

Fixing the Auto Structure: An Investigation into the Flawed Structure of Fix Auto

Photo by Malte Lu on

Written by Timothy J. Tetreault on December 1, 2016 – Mount Royal University

Introduction and Overview

Fix Auto is an auto body repair company based in Montreal, Quebec that is looking for rapid worldwide expansion. Fix Auto operates within an external task environment which has many opportunities but also many threats.

Politically, governments are changing how infrastructure spending is allocated. More taxpayer dollars are being spent on mass transit initiatives such as the City of Calgary’s green line project, which aims to create a new train corridor with the municipal and federal governments guaranteeing a cumulative $3.08 Billion towards the project (“Green Line”, 2016). The implication for the auto industry (including Fix Auto) is that the transit projects aim to reduce emissions by having fewer cars on the road. With fewer cars on the road, the likelihood of collisions and the customer base are reduced

Photo by Andre Moura on

The socio-cultural tendencies of society increasingly are leaning toward an ecological outlook. People work to reduce their adverse environmental impact and many opt out of driving entirely. Environmental awareness has people taking mass transit and walking (or biking) to their destinations, which means less cars are on the road. Society is moving toward more fuel efficient cars that retain value for longer amounts of time. Modern cars are built to last longer and wear out less quickly. Computer technology is now able to optimize everything from gear shifting to lane positioning, and even taking complete control of a vehicle. As a result, parts wear out more slowly and collisions are less frequent. Parallel to the environmental awareness movement, car manufacturers have been working to make the cars themselves lighter in an effort to conserve fuel. The traditional steel and aluminium bodies are being replaced by lighter, plastic, fibreglass, and carbon fiber builds which are not easily as repaired.

Provisions in the law also create issues for Fix Auto. Provincial and federal governments are moving towards carbon taxes, which will hit drivers with higher fuelling prices with the goal of reducing vehicle mileage. In fact, “A $50 carbon tax would drive up pump prices by 11 cents a litre” (Mccarthy & Leblanc, 2016, para. 11). 

Photo by Magda Ehlers on

Strengths in the Fix Auto organization include their branding and rapid ability to expand operations with limited operating costs. Fix Auto is working to create a trusted Auto Service brand in an industry that historically is not credible (CB Staff, 2016, Para. 4). Fix Auto gains a competitive advantages through their provocative campaigns. Rapid worldwide expansion is facilitated through their operation of 229 Canadian locations as well as those in other countries (CB Staff, 2016, Para. 3). The franchise structure enables them to quickly open new shops based on a ‘cookie cutter’ set of procedures. It also places the risks onto the franchisee owners as opposed to the Fix Auto brand themselves. Profit margins are maximized as a result.

Major weaknesses to international expansion are the organizational structure and the command hierarchy. The current organizational structure does not allow for different socio-cultural standards and adaptations for the different regions.

According to the Canadian Business (2016) article, the “Canadian market is actually pretty much rolled up… The U.S., however, still represents a huge opportunity” (CB Staff, Para. 10). This is because unlike the Canadian Auto repair industry, the United States consists primarily of privately owned shops. Many of the shop owners are straining in the attempt to retain profit margins in the current economic environment, creating an opportunity for companies such as Fix Auto.

Photo by Kevin Bidwell on

Through buying out these individual shops, Fix Auto can continue to build its brand and its bargaining power with suppliers. This enables them to pass lower prices on to the customers, building a competitive advantage in the industry and increasing supply chain efficiency. Another opportunity that Fix Auto faces is the advancement of technology. Modern materials make the repair process more complex and expensive, creating an opportunity for established brands such as Fix Auto. The individual repair shops are increasingly unable to compete with established brands such as Fix Auto, and this contributes to the competitive advantage that Fix Auto could potentially establish.

Threats to the Auto Repair industry include government policy, technological advancements and economic struggles. Carbon taxes and public transit spending encourage people to switch to alternate methods of transportation. Fewer drivers means less collisions to repair. Driver error is reduced through new computerization and detection systems. If auto repair companies do not adapt, they lose competitive advantage over companies that do. Finally, fewer people can afford to operate a vehicle in the current economic climate.

Photo by Albin Berlin on

Focal Issue

The organizational structure of Fix Auto is the primary issue in that it does not accommodate the varying regions of the world. They have one division and a ‘cookie cutter’ approach that works in Canada, but may not be as effective in other countries such as the United States and many parts of Europe. The current organizational structure of Fix Auto is functional with divisions based on the acquisition of Prime CarCare Group, a parent company to 142 franchise locations under a variety of different brands (“Fix Auto to Acquire”, 2016, Para. 1,4; “Fix Auto Canada”, 2016, Para. 1, 3).

Regional Implications

Fix Auto’s current organizational structure is inefficient through their bureaucratic controls and the standardization of rules and operating procedures. A set of guidelines that works in Canada will not work elsewhere. European cities for example, are historically different than North American cities. The rich aristocratic citizens who can afford vehicles, live in different areas of the city. In the United States, the prestigious communities tend to be found in the suburbs, whereas in Europe, the city centers are where you find the wealthy. On top of that, in the United States, the automobile has encouraged people to spread into the outskirts through the diminishing attractiveness of the center for communal activities (Melosi, n.d. Para. 5). Rather than having the North American driving culture, more densely populated regions of the globe rely heavily on public transport, cycling, and walking. This means that the same organizational structure cannot be used effectively worldwide to maximize the global market.

Photo by Mihail Mihaylov on

Legal / Trade Implications

Fix Auto operates in a manner that follows Canadian legislative guidelines which varies by national region. The global presence of Fix Auto creates an inefficiency through the requirement to comply to the laws of several differing countries. Each country has its own unique labour standards, competition regulation, licensing processes and tax codes. 

In addition to internal legislation, each country has foreign policy regarding the importation of auto parts. The North American Free Trade Agreement (NAFTA) and the European Union (EU) reduce trade restrictions and tariffs within their respective regions; however, trade between EU and NAFTA countries still have tariffs and taxes. Fix Auto operates in both regions, creating an inefficiency in regards to importing parts for foreign cars. In Europe, taxes are placed on North American car parts and vice versa. The current organizational structure does not effectively take advantage of the trade agreements because Fix Auto is expanding worldwide instead of improving domestic operations in each region.

The national boundaries of Canada are not a confinement for competition guidelines (“Competition Law”, 2013, Role of International Cooperation. Para. 1). Many countries worldwide have slightly different legislation regarding the prevention of monopolies. Due to the rapid expansion of the Fix Auto franchise, they are subject to regulations found in the Canadian Competition Act such as: “the Tribunal shall not find that a merger or proposed merger prevents or lessens, or is likely to prevent or lessen, competition substantially solely on the basis of evidence of concentration or market share” (Canadian Competition, Sec. 92(2)). The Competition Act ensures that monopolies do not occur through expansion, merger or sale of a company. An example of the Competition Bureau becoming involved with the enforcement of competition regulation occurred in 2013, when Sobeys acquired Safeway and was forced to sell 23 of their locations to meet competition requirements (“Competition Bureau Statement”, 2013, Para. 2). Fix Auto needs to meet similar obligations in regards to their expansion.

Wrong Expansion Objectives

While Fix Auto now has expanded operations into Australia and South Africa, (“Fix Auto Launching”, 2016, Para. 1; “Fix Auto South”, 2016, Para. 2) they are far from completely developing the North American market. Even in Canada, Fix Auto operates no locations in many provinces and territories such as Manitoba and Saskatchewan. On top of this, they are failing to test markets before entering. Fix Auto risks following in the failed footsteps of Target, in that they are moving into new markets with more investment than would be advisable (Dahlhoff, 2015, Para. 5)

Photo by Pixabay on


There are two feasible solutions to the inefficiencies that Fix Auto is experiencing as a result of their uncontrolled global expansion. 

The first solution for Fix Auto should be to divide its organizational structure into regions. Independent management for different regions rather than worldwide control in Montreal. Organizations with strategy based on region tend to perform more efficiently and effectively than global orientated strategies (Ghemawat, 2005, Para. 2). Fix Auto should adopt a hub strategy, where they open regional offices and operate the regions like individual companies (Ghemawat, 2005, the Hub Strategy.). Locations in European should report to a separate European administration instead of the one based in Montreal. This allows the European operations of the company to operate more efficiently because Fix Auto would be able to employ regional presidents who know the local legislation of the country or region. Larger countries such as Canada and the United States should also be divided into regions. The United States could be divided into three regions (Pacific, Midwest, and Atlantic) with potential hubs in San Diego, Omaha and Atlanta. Similarly, they should divide Canada into regions (East and West) with potential hubs in Calgary and the existing one in Montreal. 

Photo by Céline Chamiot-Poncet on

Fix Auto should slow expansion into new countries and paying unnecessary premiums when there is still room to expand in existing markets. It is mentioned earlier that there are no locations in Saskatchewan, Manitoba and much of their target market in the United States. Fix Auto needs to focus on their primary objective of becoming the North American auto body repair chain. Fix Auto is experiencing overexpansion. “Overexpansion often occurs when business owners confuse success with how fast they can expand their business” (Schaefer, 2006, Overexpansion. Para. 1). In a 2005 study done by the Law School at the University of Chicago, it was found that of the Chapter 11 Small Business Bankruptcies issued in the United States, overexpansion contributed to a “non-trivial” (Baird & Morrison, 2005, Pg. 7, Para. 1) number of cases. The best method for expansion is steadily and to move to new countries one at a time. (Schaefer, 2006, Overexpansion. Para. 1). Fix Auto should capitalize on their existing regions such as the United States, Canada, and the United Kingdom before moving into new markets such as Australia, South Africa and Turkey. 

If Fix Auto desires to maximize corporate efficiency, they need to begin operating the differing regions as separate divisions with unique management and hubs. This way, each region is able to have expertise in local legislation and cultural standards. They need to implement regional strategies, offices, and management before opening branches in new countries and global regions.

In conclusion, while Fix Auto is rapidly expanding into new regions, their organizational structure fails to accommodate for regional differences and as a result, there are inefficiencies in the company. 



Baird, D. G., & Morrison, E. R. (2005, January 4). Serial Entrepreneurs and Small Business Bankruptcies. Retrieved November 30, 2016, from

Canadian Competition Act, R.S., 1985, c. 19 (2nd Supp.), s. 45; 1999, c. 2, s. 37. Retrieved from

CB Staff, (2016, May 24). Inside the race to consolidate the auto-collision repair business. Retrieved November 23, 2016, from 

Competition Bureau Statement regarding the Proposed Acquisition by Sobeys of Substantially all of the Assets of Canada Safeway. (2013, October 22). Retrieved November 30, 2016, from

Competition Law in a Global and Innovative Economy — A Canadian Perspective. (2013, November 21). Retrieved November 30, 2016, from

Dahlhoff, D. (2015, January 20). Why Target’s Canadian Expansion Failed. Retrieved November 30, 2016, from

FIX AUTO CANADA ACQUIRES PRIME CARCARE GROUP. (2016, May 6). Retrieved November 25, 2016, from

Fix Auto Launching Collision Repair Network in Australia – CollisionWeek. (2016, August 03). Retrieved November 30, 2016, from

Fix Auto South Africa Appointment Announcement. (2016, August 3). Retrieved November 30, 2016, from

Fix Auto to acquire Prime CarCare Group. (2016, May 6). Retrieved November 25, 2016, from

Ghemawat, P. (2005). Regional Strategies for Global Leadership. Retrieved November 30, 2016, from

Green Line – Vision. (n.d.). Retrieved November 24, 2016, from

Mccarthy, S., & Leblanc, D. (2016, October 03). Liberal government’s carbon tax plan provokes anger from provinces. Retrieved November 24, 2016, from

Melosi, M. V. (n.d.). The Automobile Shapes The City: From“Walking Cities”to“Automobile Cities”. Retrieved November 25, 2016, from

Schaefer, P. (2006). The Seven Pitfalls of Business Failure and how to Avoid Them. Retrieved November 30, 2016, from

Alternative Politics: The Polarization Effect

Photo by kendall hoopes on

Written by Timothy J. Tetreault on April 7, 2017 – Mount Royal University


Cable television and broadcast radio have long been powerful outlets for communicating political ideas. But in the Facebook era, has it gone too far? Media has been used by leaders in the past to promote communist ideologies, fascist ones and everything in between. Media has a way of controlling and convincing people. News outlets are able to alter and manipulate facts in order to better fit their agenda. It is as simple as taking speeches out of context and placing pieces together in order to convince audiences of an untruthful coverage of events. (Reese, 1996)

One way of accomplishing this is by editing a speech and subjecting the audience to what the media wants them to hear. You can have the exact same speech covered by two different outlets and one will make the politician out to be a saviour while the other will make him out to be satan himself. The recent United States election brought these issues to the forefront and highlighted the worst in both Democrats and Republicans. President Donald Trump reiterated, time and time again that the divisions in society were caused in large part by the ‘fake news’ outlets that inaccurately covered his campaign. (Carson, 2017).

Photo by Mike on

Conflict’s Impact on Media

Perhaps the very reason that Donald Trump’s victory was a surprise for so many people was largely in part that his campaign was inaccurately covered by outlets such as CNN, MSNBC and even at times, Fox News. 

Trump was able to collect just under $5 Billion in free campaign coverage (Miere, 2016) because the news stations care less about the political situation and more about their bottom lines. When conflict occurs, revenues and viewership soares. The 2016 Election campaign – to the media – was a blessing. And Donald Trump rode their coverage to the White House. 

The media is able to encourage polarization through those already further from the political center (Levendusky, n.d.). These people become passionate in their views and hatred toward opposing ideas is fostered and conflicts occur.

Photo by Pixabay on

The fact is that the mainstream media, right and left, could not get enough of the Republican nominee. Every controversial thing he said, regardless of how ridiculous it was got covered by the media. Primetime viewership for many of the major cable news networks was increased by up to 50% compared with previous years. In addition to this, the middle age demographic has increased 55% during the election campaign. (Berg, 2016, para. 4) The 2016 revenues for the mainstream outlets has increased an average of 15% when compared to the year before. (Berg, 2016, para. 5). The inadequacies of the candidates were played up by the mainstream media in order to create drama and ensure that there was always a story to cover. The tech generation cared more about the personal details of the candidates than about the actual policy proposed. Trending stories were often lacking in rational substance, and shared for emotional reasons. (Carr, 2015)

When Trump attacks the media, they still have no choice but to cover him. Otherwise the media would lose their ratings, viewership, and ultimately profit margins. A BBC interview with Allen Montgomery – administrator of the National Report – stated that they “have made $10,000” on certain stories. He admitted to altering content when “thousands of dollars are made per story.” (Trending, 2016)

Photo by Tracy Le Blanc on

Social Media’s Impact

In addition to the mainstream media’s untruthful and often incomplete coverage of important events, social media has had a significant impact in the roles of politicians. There is no doubt that social media has the capability for candidates to reach their target demographics cheaply and effectively. President Obama was the first American president to use social media to help his campaign, and his “Ask me Anything” thread quickly became the most popular thread on Reddit (Green, 2015). This is largely because Obama was able to engage his primary target demographic: millennials. Millennials account for a sizable portion of the total voter base, and therefore are important targets. Social media is the easiest way to engage them. In a 2012 study completed by the Harvard Kennedy School’s Shorenstein Center on Media and Public Policy, they found that Facebook has a significant impact on the voting patterns of millennials. To be precise, Facebook had an impact of 340,000 votes among undecided millennial voters. (Wihbey, 2016) Of the millennial vote, over one third reported reading an article on social media that would influence their vote according to Ipsos Mori, a European market research firm (A third, 2017).

Social media has its detriments, though, as it allows anybody to like, share and engage users in content development which can lead to fringe news sources such as Breitbart, Infowars and Occupy Democrats that are able to easily share biased, untruthful content to any specific demographic of users (Tan, 2017). The issue is that among the younger generations: Millennials, Generation Z and to an extent, Generation X, the most common source of news is Facebook, Twitter or Google. These generations rely less on traditional sources, and more on digital ones. This allows untruthful news easily to be spread and shared to a large number of people (Marchi, 2012).

Human beings are instinctively vulnerable to routine. There is a comfort in knowing that nothing can contest or contradict an ideology. There is a complex set of socio-cultural,  intellectual and economic biases that can interfere with the ability to accept opposing ideas. People instinctively trust friends and are more likely to follow links shared online by their circles (Menczer, 2016). This quality about humans means that echo chambers are able to form and polarization occurs between right and left sides of the spectrum. Views become black and white as opposed to shades of grey. (Overly, 2016)

Photo by Junior Teixeira on

In 1969, Paul Baran – an awarded internet pioneer – predicted in his paper On the Impact of New Communications Media Upon Social Values that as more specialized channels exist in a medium, the more users are able to isolate themselves and believe their own truths. He predicted that the truth is skewed into different groups, each with a differing idea of the truth. Baran writes that acceptance of differing opinions is fundamentally what democracy is built upon, and there is a serious threat presented in these alternate truths (Novak, 2013).


The media is powerful tool, that if utilized effectively by politicans, strong and rallying messages can be communicated easily. It is essential to the election campaigns of leaders, but without moderation can overstep boundaries. The digital mainstream media has done just this and profits often trump truthfulness. The media is a modern neccessity, but in the post-truth era, it is often the number of likes or shares that can re-enforce validity. Stories are shared based on emotional connections as opposed to rationality and this opens the door for fringe sites and echochambers to rise up where views are not challenged. Isn’t failure to challenge ideas the fundamental principle of dictatorships?

Isn’t failure to challenge ideas the fundamental principle of dictatorships?



A third of young people think social media will influence their vote. (2017, April 04). Retrieved April 04, 2017, from[m]/1/

Berg, M. (2016, November 11). Donald Trump May Hate The Media, But They Are Both Winners This Election. Retrieved April 03, 2017, from

Carr, N., Rondón, A. M., Lund, A., & Heffernan, V. (2015). How Social Media Is Ruining Politics. Retrieved April 05, 2017, from

Carson, J. (2017, February 08). What is fake news? Its origins and how it grew in 2016. Retrieved April 06, 2017, from

Green, R. K. (2015, November 16). The Game Changer: Social Media and the 2016 Presidential Election. Retrieved April 04, 2017, from

Levendusky, M. S. (n.d.). Why Do Partisan Media Polarize Viewers? Retrieved April 4, 2017, from

Marchi, R., PhD. (2012). With Facebook, Blogs, and Fake News, Teens Reject Journalistic “Objectivity”. Retrieved April 5, 2017, from,%20Blogs,%20and%20Fake%20News,%20Teens%20Reject%20Journalistic%20%E2%80%9CObjectivity%E2%80%9D.pdf

Menczer, F. (2016, November 28). Fake Online News Spreads Through Social Echo Chambers. Retrieved April 04, 2017, from

Miere, J. L. (2016, November 09). Did The Media Help Donald Trump Win? $5 Billion In Free Advertising Given To President-Elect. Retrieved April 05, 2017, from

Novak, M. (2013, April 05). TV Will Tear Us Apart: The Future of Political Polarization in American Media. Retrieved April 04, 2017, from

Overly, S. (2016, November 07). Your political posts on social media are actually changing minds – sometimes. Retrieved April 05, 2017, from

Reese, S. D., & Shoemaker, P. J. (1996). Mediating the Message. Retrieved April 5, 2017, from

Tan, E. E., & Ang, B. (2017, February 9). Clickbait: Fake News and the Role of the State. Retrieved April 5, 2017, from

Trending, B. (2016, November 06). The rise and rise of fake news. Retrieved April 05, 2017, from

Wihbey, J. (2016, October 27). Facebook experiment in social influence and political mobilization. Retrieved April 04, 2017, from

An Evaluation of Canadian Tire’s Supply Chain

Photo by Albin Berlin on

Written by Timothy J. Tetreault on September 17, 2019 (Mount Royal University)

Operating an efficient and effective supply chain is a necessity for the long term longevity of an organization. A supply chain is the processes and procedures needed to most effectively get the product to the end consumer.

Supply chain management involves controlling the flow of resources and information within an organization such as policies, processes, and
procedures to best deliver the product to the customer. This includes handling and distribution activities, as well as financial management (Reed, 2018).

This article aims to evaluate some current supply chain elements in the retail organization Canadian Tire and suggest improvements to the system or strategy if any are needed. Location is important to the distribution of their stock among over 1700 stores, and this will be investigated as well as the future requirements for the supply chain.

Company Profile

Canadian Tire is one of Canada’s top retailers and a leader in their industry. They offer a multitude of products in the automotive, sports, home, garden, and living categories of goods. Their primary locations are easily recognizable by the triangular logo affixed to the front of each of their general merchandise stores. Canadian tire also owns the brand PartSource
which specializes in automotive parts (C, 2016).

Photo by Maarten van den Heuvel on

Canadian Tire operates on a franchise based system. There are 500 independently owned Canadian Tire locations across Canada operated by third party dealers. The merchandise found in each of the stores or online is purchased from the corporate entity for sale to consumers. The supply chain, marketing, and other administrative activities are taken care of
by the Canadian Tire Corporation (CTC). Each dealer owns their own inventories, must cover their own operational costs, and must comply with corporate guidelines. Sale pricing and purchasing abilities are set out by Canadian Tire (C, 2016). Canadian Tire recognizes that in order to become “Canada’s Store,” they need to branch out into other industries as well.

Canadian Tire recognizes that in order to become “Canada’s Store,” they need to branch out into other industries as well.

Canadian Tire Petroleum was founded in 1958 under the same
system as the regular Canadian Tire stores (About, n.d.). Today there are 296 gas bars (83 car washes and 293 convenience stores) operating under the banner “Gas+.” Canadian Tire has the contract to build and operate 23 Petroleum locations along major Ontario Highways (C, 2016).

In 1968, CTC expanded its portfolio by integrating financial services through the acquisition of Midland Shoppers Credit Limited (Canadian Tire, 2019). Canadian Tire Financial today has a wide array of Canadian Tire branded credit cards and insurance. Canadian Tire financial processes all of the transactions from their other subsidiaries and dealers.

PartSource caters to the automotive sector and specializes in automotive parts. Canadian Tire Automotive is a part of their stores and is targeted toward the average consumer while PartSource targets those people who wish to DIY their repairs.

In 2001, Canadian Tire Purchased Mark’s Work Wearhouse in order to capitalize on the high quality workwear, casual clothing, and activewear industries . They would later change the name to just “Marks” for branding purposes. Marks today has 349 corporate stores and 33 franchise stores across Canada (C, 2016). In 2011, Canadian Tire acquired the Forzani Group in a $771 million deal which made Canadian Tire a leader in the sports equipment and outdoor recreation retail sectors (Flavelle, 2011).

The Forzani Group owns SportChek, Sport Experts, and Atmosphere and has 433 locations across Canada (257 Corporate, 176 Franchise) (C. 2016). In 2013, Canadian Tire Corporation launched the subsidiary CT REIT which is a real estate investment firm. CT REIT owns 303 properties across Canada that are leased out to the CTC Dealers (CT REIT, n.d.).

Canadian Tire faces increasing threats from American based multinationals such as Lowes, Home Depot, Nordstrom, Walmart, and Costco. As a result, their ability to remain competitive depends on the competitive advantages associated with efficient operations, supply chain, and diversity in their business model (C., 2016).

Photo by George Becker on

Although known primarily by its retail storefront, Canadian Tire’s success is based on their supply chain and distribution abilities. They strive on moving goods and products through their distribution networks. Efficient distribution management is essential to ensuring that every individual store of every brand is able to succeed in the competitive retail marketplace.

The vast majority of Canadian Tire’s inventory is processed in one of four distribution centers across Canada. There is one in Brampton, and one in Bolton, Ontario that are managed by Canadian Tire’s corporate entity. In addition, there is one in Calgary and another in Montreal that are operated by third party logistics companies.

The Forzani Group, PartSource, and the Marks subsidiaries have separate distribution centers located in Calgary and Mississauga (C.,2016).

Demand Forecasting

An important aspect of any supply chain is its ability to forecast future demand and ensure that the processes are in place to have the product ready for the customer (Reed 2018).

Canadian Tire has about 2000 suppliers that supply the inventory for their distribution centers, and ultimately, their stores. Domestic suppliers account for about 55% of these, while international imports are the other 45% (Wang, n.d.).

A forecast is needed to coordinate the orders out to suppliers so that the product is delivered timely, and in proper quantities. Canadian Tire uses historical demand information, combined with potential growth in demand to predict as accurately as possible, future demand. These forecasts take into account seasonal changes (you will sell more snow shovels in December than July) as well as trending styles. For new products, historical analysis of similar products is used. (Wang, n.d.)

Photo by on

Canadian Tire keeps very little inventory on hand because of the efficiency of their forecasting. Every week, 2000 suppliers are sent production forecasts for 26 weeks in advance. If there are any sales, Canadian Tire ensures that they have an adequate amount of inventory to handle the demand. This allows the suppliers to be able to source raw materials, have them delivered in their own supply chains, and manufacture the products for Canadian Tire (Anne, 1998).

Distribution centers receive store orders from each of the individual dealers which are then picked from the stored inventory and shipped. The distribution center’s inventory will also need to be replenished from suppliers. The objective of the distribution center model is to move
as much product as possible as quickly as possible without running out, or having a large excess of inventory.

The statistical forecast allows Canadian Tire to more accurately predict how much demand there will be, and this helps in the replenishment process (Wang, n.d.).

Bolton, Ontario Distribution Center

In 2017 Canadian Tire Corporation opened a new distribution center in Bolton, Ontario to replace their aging Brampton facility. This facility is approximately 1.5 million square feet and is designed to receive 15,500 different SKUs from suppliers and store them for later shipment to
the Canadian Tire dealers (Trebilcock (a), 2019).

Bolton Distribution Center:

– 1.5 million square feet –

– 15,500 SKU Processing Capacity –

– 350 Daily Trailers –

– 244 Docks –

The facility is designed to process 350 trailers per day through 244 receiving and shipping docks, which amounts to about 65 million cubic feet
of product each year. The Bolton distribution center is designed to handle inventory for the approximate 1700 Canadian Tire dealers across Canada while the Calgary, Montreal, and Brampton locations are serve more regional purposes and deal only with items with high turnover (Trebilcock (b), 2019).

Photo by Pixabay on (not the Bolton Center)

Since opening the Bolton facility, Canadian Tire has experienced an improvement in product flow through its distribution network, as well as better pallet fill rates, and reduced costs (Trebilcock (b), 2019).

The distribution center is divided up into a cellular layout with three different departments. Building A is the largest of the three, and is also the most automated. This is where the smaller items, or easily movable and packable items are sorted and distributed. There is a 4 story picking center where items are picked, packaged, then sent down one of 197 chutes to be shipped out below.

Building B is designed for items that pass through the facility quickly as well as oversized items and the products are not stored long.

Building C is where awkwardly designed items such as snowblowers, lawnmowers, hockey sticks, and hazardous materials are processed. There is also a machine in this building that processes automotive tires automatically (Trebilcock (b), 2019).

Photo by Pixabay on

The cellular layout of the Bolton distribution center allows for efficient receiving, sorting, and distributing activities. By dividing the facility into areas that are able to process items with similar processing requirements, Canadian Tire is able to more quickly build orders for their dealers across Canada (Trebilcock (b), 2019).

Notably, receiving and shipping areas are on opposite sides of the facility. This allows products to flow through the facility smoothly, and Canadian Tire is able to limit the amount of interaction between differing items; there is little cross interaction between departments.


The Bolton Distribution center’s location gives Canadian Tire many strategic advantages. The distribution center is located near the 400 series highway system which opens up easy access to essentially all of Ontario, down into the United States, and into the rest of Canada.

Many of the international suppliers that serve Canadian Tire are from the United States so this is a convenient location that is already designed for the large amount of traffic serving the facility. One of the perks of building outside of a larger urban center such as nearby Toronto, operating costs are kept low, and congestion is less likely to impair supply chain operations
(Foxman, 2018)

Photo by Marieke Schönfeld on

In addition to this, CP and CN operates an intermodal train terminal nearby as well which means that the Canadian Tire containers can easily be shipped to and from the facility from western Canada and overseas markets through Vancouver, Halifax, and Montreal (Foxman, 2018).

In 2016, CT REIT purchased the former Sears Canada distribution center in Calgary after Sears went bankrupt. This warehouse backs onto Canadian Pacific’s Calgary train intermodal, and it also has easy access to both Stoney Trail and Deerfoot Trail (Wilcox, 2018).

Canadian Tire had already owned a distribution center next door to the former Sears one, but the Sears facility has access to the CP train line (Toneguzzi, 2018).

Photo by mhtoori .com on

Calgary is an an important distribution hub for companies wishing to build supply chains in Western Canada. There is easy rail and road corridors to other large cities such as Edmonton, Regina, Vancouver, and down into the United States.

Calgary was once primarily an oil and gas city, but recent infrastructure investments such as the Stoney Trail ring road, and the increasing airport cargo capabilities makes it a good place for building distribution centers (Buxbaum, 2017).

Shipping Containers

Photo by on

Canadian Tire has invested in developing a fleet of 60’ shipping containers. These branded containers are designed to easily integrate with all of the supply chain systems that CTC has built. Canadian Tire has a contract with Canadian Pacific to be able to attach the containers to flat deck rail cars. This allows for easy transport to any of the Canadian Tire distribution centers. In Bolton and Calgary, the nearby intermodal terminals allow for simple unloading to flat deck semi-trailers.

In Halifax and Vancouver, the CP containers can be loaded onto ocean liners for Atlantic and Pacific transport. Foreign suppliers fill the containers with
product, and they are brought back to the Canadian distribution centers (Norbury, 2015).

Helly Hansen Acquisition

In 2018, Canadian Tire acquired the Norwegian clothing manufacturer Helly Hansen for $985 million. Helly Hansen has a supply chain that distributes products to more than 40 countries in Europe, and across the world (Press, 2018).

Helly Hansen specializes in manufacturing and distributing athletic, and work wear (Celebrating, n.d.). This acquisition supports Canadian Tire’s core business. Helly Hansen integrates very well with Marks, and Forzani branding. Both companies already carry Helly Hansen products, but the acquisition gives Canadian Tire access to the distribution network in Europe and the United States.

Photo by Melvin Wahlin on

Helly Hansen gains access to the CTC supply chain as well, therefore Canadian products can be sold in foreign markets (Canadian Tire Corporation, 2018).

The Helly Hansen acquisition is also important for Canadian Tire because it secures the availability of one of its biggest suppliers. Canadian Tire was for a long time one of Helly Hansens largest customers, but now that they are owned by CTC, there is little risk of losing contracts between the two companies (Canadian Tire Corporation, 2018).

Target’s Mistake

The american brand “Target” serves as a testimony to the consequences of rapid expansion without building a supply chain first, and Canadian Tire should be taking notes (Wahba, 2015).

In 2013, Target opened 124 stores in Canada and attempted to give other retailers such as Walmart, Costco, and Canadian Tire a run for their money. Upon opening however, shelves were empty, and the products that were present were costly and unappealing to Canadian shoppers. Inventory planning was neglected and Target ended up taking a $5.4 billion loss
(Wahba, 2015).

Photo by Pixabay on

Target purchased Zellers from HBC for $1.8 billion which gave them access to an existing distribution network. This is similar to Canadian Tire’s Helly Hansen investment. Target is branded in the United States to appeal to the middle class, whereas Zellers was meant for low-income citizens. The stores were also located in low income areas of Canada. Failure to choose middle-income locations played into the fall of Target (Wahba, 2015).

Technology, inventory management, and POS systems also played a role in the downfall of Target. The management teams at the Target corporate office decided to go with a software program known as SAP for their systems. This program is currently used by Indigo, Sobeys, and Loblaws.

The first time that Sobeys implemented the SAP program, it failed drastically and they reverted to old methods before trying again. Loblaws took 5 years before SAP worked for their supply chain. Target attempted to integrate the SAP program in a supply chain where none of the employees had prior experience with it in a short timeframe (Castaldo, n.d.).

Photo by WinSon 5293 on

Target ordered massive amounts of inventory for their launch, but the inventory tracking systems, and the improvised supply chain resulted in lost orders, and delayed shipments. Stores were unable to keep a base amount of stock and as a result, shelves were empty. Target had three distribution centers in Canada, and each one was at capacity with goods.

Semi trucks were left idling outside because they were unable to access the distribution centers. Eventually Target resorted to renting additional storage facilities just to accomodate for the excess of stock. On paper, Target had tons of products in their system, and yet store shelves were empty (Castaldo, n.d.).

Canadian Tire’s expansion with Helly Hansen is not nearly as aggressive as Target’s expansion, but the consequences are just as likely.

Canadian Tire thus far has done an excellent job in building the supply chain before expanding, but previously all expansions were within Canada. Canadian Tire will face the same challenges that Target did if they intend to expand into the European and international markets. They will need to develop the existing Helly Hansen supply chain before they plan for additional expansion.


Photo by Craig Adderley on

In conclusion, Canadian Tire operates a very well designed supply chain. Product flows smoothly from each of the 2000 suppliers, through the distribution network, and into consumer hands. The corporate strategy aligns well to CTC becoming not only Canada’s retailer, but a leading global retailer as well.

There is not much needed as far as change is concerned, but Canadian Tire needs to be cautious with the rapid expansion that they have been going through with their Marks, Forzani, and Helly Hansen acquisitions. If the supply chain is unable to keep up, customers will experience high prices on goods, and slow service rates. Both of these factors will lead to
struggles in product turnover and cash flows.

  • Alternative Politics: The Polarization Effect

    25th Sep 2019 by

    Written by Timothy J. Tetreault on April 7, 2017 – Mount Royal University Introduction Cable television and broadcast radio have long been powerful outlets for communicating political ideas. But in the Facebook era, has it gone too far? Media has been used by leaders in the past to promote communist ideologies, fascist ones and everything… Read more

  • An Evaluation of Canadian Tire’s Supply Chain

    17th Sep 2019 by

    Written by Timothy J. Tetreault on September 17, 2019 (Mount Royal University) Operating an efficient and effective supply chain is a necessity for the long term longevity of an organization. A supply chain is the processes and procedures needed to most effectively get the product to the end consumer. Supply chain management involves controlling the… Read more

  • Canada: First Past the Post – A Case for Status Quo

    15th Sep 2019 by

    Written by Timothy J. Tetreault on September 15, 2019 (Mount Royal University) Introduction Is Canada’s political system in need of change? Every election cycle, the losing party complains about the current ‘first past the post’ system. They complain that the election was lost because of election bias, where the winning party is over-represented in the… Read more

  • Reasons That Every Student Should Paint

    14th Sep 2019 by

    Written by: Timothy J. Tetreault on September 14, 2019 Early morning frost coated my every breath as the stepladder slipped out from under me and I came tumbling down onto the cold pavement. Most of a gallon of paint coated me, the grass, and the concrete steps leading up to the house. Adrenaline rushed through… Read more

View all posts


About Canadian Tire Petroleum. (n.d.). Retrieved March 12, 2019, from
Ann Zimmermann, Kim. “CANADIAN TIRE: BETTER FORECASTING EQUALS SUPPLY CHAIN EFFICIENCIES.” HFN The Weekly Newspaper for the Home Furnishing Network 5 Oct. 1998: 16. Business Insights: Essentials. Web. 13 Mar. 2019.

[Bolton Distribution Center Layout]. (2019). Retrieved March 13, 2019, from Buxbaum, P. (2017, September 11).

Calgary’s positioning as inland hub. Retrieved March 19, 2019, from

C. (2016, December). Management’s Discussion and Analysis Canadian Tire
Corporation, Limited Fourth Quarter and Full Year 2016. Retrieved March 12, 2019, from -and-Notes-Q4-2016.pdf

Canadian Tire Corporation. (2019). About Us. Retrieved March 12, 2019, from

Canadian Tire Corporation to Acquire Helly Hansen. (2018, May). Retrieved March 19, 2019, from

Castaldo, J., & Hallberg-Campbell, J. (n.d.). The Crazy Story of What Really Went Wrong at Target Canada. Retrieved March 19, 2019, from

Celebrating 140 Years of Innovation. (n.d.). Retrieved March 19, 2019, from

CT REIT. (n.d.). Company Overview. Retrieved March 12, 2019, from

Flavelle, D. (2011, May 09). Canadian Tire scores deal with sportswear chain. Retrieved March 12, 2019, from

Foxman, S. (2018). Boasting the Largest Supply Chain Network In Canada, Canadian Tire is Innovating to Continue Meeting the Expectations of its Customers in Every Corner of the Country. Canadian Retailer – Supply Chain Edition, 46-49.

Norbury, K. (2015, March 02). Sixty-foot containers expected on Canadian roads this year. Retrieved March 19, 2019, from

Press, T. C. (2018, May 10). 5 things to know about Canadian Tire’s new acquisition,

Helly Hansen. Retrieved March 19, 2019, from

Reed, C. (2018, June 25). 8 Critical Elements Of A Supply Chain Strategy – From Discovery To Commercialization. Retrieved March 19, 2019, from

Toneguzzi, M. (2018, December 17). CT REIT assembles an entire Calgary block | RENX – Real Estate News Exchange. Retrieved March 19, 2019, from

Trebilcock, B. (a) (2019, January 16). Inside Canadian Tire Distribution Center: Design for flexibility. Retrieved March 13, 2019, from

Trebilcock, B. (b) (2019, February 01). System Report: Bulking up at Canadian Tire. Retrieved March 13, 2019, from

Wahba, P. (2015, January 15). Dumpy locations, empty shelves and poor pricing compared to Wal-Mart doomed Target’s efforts in Canada. Retrieved March 19, 2019, from

Wang, J., Ph.D. PMP (P.E.). (n.d.). Supply Chain Management in Canadian

Canada: First Past the Post – A Case for Status Quo

Photo by Daniel Joseph Petty on

Written by Timothy J. Tetreault on September 15, 2019 (Mount Royal University)


Is Canada’s political system in need of change? Every election cycle, the losing party complains about the current ‘first past the post’ system. They complain that the election was lost because of election bias, where the winning party is over-represented in the House of Commons, and the losing party is often under-represented. The current system allows for majority governments to be formed, even with a lower than opposition popular vote count. Supporters of this electoral system would argue that it gives power to people whose vote would otherwise not count. (Brodie, 2017)

Photo by Splash of Rain on

The current Canadian system is a single member plurality (SMP), one which is designed to manufacture majority governments. Majority governments are more effective at passing legislation because the focus is primarily on majority groups, and legislation is able to quickly and efficiently be passed. The system is designed to be a winner-take-all approach to the individual constituencies across the country. (Norris, 1997, pp. 3 para. 1)

The seats in the House of Commons are awarded to the winner of each of the 338 constituencies. This assures that each region of Canada has input into the decisions made in Ottawa. For example, a riding in Nunavut will have as much influence in the House of Commons as one from Vancouver. 

Proportional Representation Advocates

Opponents to the current SMP system argue that manufactured majority governments are undemocratic and the elected representatives may not properly reflect the values held by the majority. Their theory is that proportional representation (PR) is a more democratic option. Proportional representation is a system in which seats are divided according to the percentage of overall party votes. This would mean that majority governments would be extremely unlikely, if not impossible in Canada because a 50% vote is required for a majority under this system. Supporters of PR would argue that manufactured majority governments prevent democracy because they overcompensate the winner and undercompensate the losing parties. For example, in the 2015 Canadian federal election the Liberals won a majority (54%) with only 39.5% of the vote. The Green Party received 3.5% of the vote, but only received 0.3% of the seats. (CBC, 2015; Nicula, 2014)

Photo by Pixabay on

Improved Representation From SMP

Canada does not need to change electoral systems and doing so will result in alienation of minority groups and provinces with lower populations. The current system allows the rural, isolated people of Canada to have more of an impact on the political decisions of the country. A revised system based on population or majority will hand the power entirely to those who live in the cities. This is due simply to the population of the cities compared to the rural areas. If the pluralist electoral system is abandoned, then the northern territories as well as possibly PEI could lost political power and influence in Ottawa (Monroe, 2002).

Benefits of Majority Governments

In addition, the election bias could be a positive thing for the political process in that it makes relatively frequent majority parties. Majority parties are more easily able to pass legislation and bills do get passed more quickly. Simply put, majority governments tend to be efficient since legislation proposed is nearly always passed regardless of opposition from other parties. Party discipline ensures that elected representatives remain loyal to their caucus leader and the their voters. As a result — unlike the US — elected representatives remain loyal to their leader and vote in favour of legislation proposed by their party (Chodos, 2006).

Minority government parties are constantly under threat from opposition. The leading party is often cautious in proposing legislation because the opposition parties can strike down a bill if they collaborate. Under the constant threat of a non-confidence vote, the leading party may have difficulty providing good leadership since their concern includes their public image. Policy is often abandoned in favour of ensuring the party survives its term in office.

“Policy is often abandoned in favour of ensuring the party survives its term in office.”

Accountability of the leading minority party is lost due to the unstable foundation upon which they are built. Minority parties are cautious introducing revolutionary or controversial bills independently. Omnibus bills are commonly used instead. These bundle policies together and include the desired bill along with other clauses that opposition parties support. Since it is an all-or-nothing vote, the leading party is able to still pass their legislation (Massicotte, 2017). Majority governments would not need to ‘hide’ legislation in an omnibus bill in order to get it passed and as a result, government transparency and accountability can be better achieved. 

Governance Through Coalitions

Majority governments also prevent coalitions from forming. Coalitions tend to reduce transparency in government in addition to the potential dangers of alliances and factions. The coalitions can lead to lies, deceit, mistrust and a general shadiness of the political parties. Leaders of these parties align themselves to the ideas of the other parties and occasionally go against their own policies. Coalitions will support a bill one time, and oppose a similar one the next. When parties work together in government, often it is for political interests, as opposed to public interests. In minority governments, parties need to win support of another party to pass any bill. This often means compromising and negotiating which could change the bill to not align to the party’s platform. 

“Coalitions can lead to lies, deceit, mistrust, and a general shadiness of the political parties”

For this reason, minority governments could also be less democratic than majority governments. With majority governments, bills can be more freely passed and backstabbing of other parties is less frequent. Minority governments are also commonly much more unstable than majority ones because in order to be successful, they depend on support of other parties.

An example of how coalition governments could be unstable and potentially dangerous is the 2016 Israeli government coalition which saw the parties: Likud, United Torah Judaism, Shas, Kulanu and the Jewish Home unite to obtain 61 of the 120 seats in Knesset (Assembly). This coalition deal was secured by the Israeli Prime Minister, Binyamin Netanyahu, and is described by the Guardian as the “most rightwing nationalist government in the country’s history” (Beaumont, 2016).

Photo by Pixabay on

The coalition saw five of the largest conservative parties come together and dominate the government. Many of the ministers in the new government have been replaced by ultra-nationalist and controversial leaders such as Avigdor Lieberman (Chief of Staff under Coalition)(Beaumont, 2016) This lays the foundation for the most recent coalition crisis in which the prime minister declared the Israel Broadcasting Authority be shut down. Moshe Kahlon, the finance minister and leader of one of the other major coalition parties believed that the authority be allowed to operate as planned. This disagreement led to speculation that the coalition could fall apart (Hoffman, 2017; Jazeera, 2017). These coalitions can grind the government to a halt and lack the foundation found in majority governments.


Manufactured majority governments are a positive thing because they ensure efficiency, transparency and strength in government.

The SMP system serves Canada well, despite the controversy that surrounds the overcompensation of the winner and penalization of the losing party. Rural areas and those of lower populations have more influence in Ottawa under the current system, and a proportional representation system will hand political influence to cities and urban centers.

Canada simply does not need to change its electoral system.


Beaumont, P. (2016, May 25). Israel coalition deal brings in its most hard-right government ever. Retrieved April 05, 2017, from

Brodie, I. (2017, February 11). Disappointed electoral reformers can learn from firearms activists how to advance their agenda: Opinion. Retrieved April 07, 2017, from

CBC News: Election 2015 roundup. (2015). Retrieved April 05, 2017, from

Chodos, H., Furi, M., Hurtubise-Loranger, E., & Robertson, J. R. (2006, July 13). Party Discipline and Free Votes. Retrieved April 6, 2017, from

Hoffman, G. (2017). Deal ends coalition crisis over public broadcasting. Retrieved April 05, 2017, from

Jazeera, A. (2017, March 19). Israeli coalition crisis raises threat of snap polls. Retrieved April 05, 2017, from

Massicotte, L. (2017). Canadian Parliamentary Review – Article. Retrieved April 07, 2017, from

Monroe, Burt L., and Amanda G. Rose. “Electoral Systems and Unimagined Consequences: Partisan Effects of Districted Proportional Representation.” American Journal of Political Science, vol. 46, no. 1, 2002, pp. 67–89.,

Nicula, M. D. (2014, January 23). The ‘First Past the Post’ Elections System Doesn’t Work for Canada. Retrieved April 05, 2017, from

Norris, P. (1997). Choosing Electoral Systems: Proportional, Majoritarian and Mixed Systems (J. Laponce & B. Saint-Jacques, Eds.). Retrieved April 5, 2017, from

Reasons That Every Student Should Paint

Written by: Timothy J. Tetreault on September 14, 2019

Early morning frost coated my every breath as the stepladder slipped out from under me and I came tumbling down onto the cold pavement. Most of a gallon of paint coated me, the grass, and the concrete steps leading up to the house. Adrenaline rushed through me as my crew – a couple new hires came rushing over to check on me.

The client – a well respected Calgary realtor – had just left for work and I had assured him that everything would go smoothly. This was one of my first ever painting projects so I had a point to prove.

I hurried off to the nearby Safeway to purchase some products to remove the paint from the steps. When I returned, I noticed that my crew was missing and I began to wonder where they were. It turns out that they decided to grab a 9:00am lunch at the local Subway.

Later that day, I splattered more paint onto the stucco house – and I spent hours trying to do a colour match to the stucco.

This day could not go any worse! I was discouraged, and I began to question my ability as a manager. I had spent a weekend in Edmonton training with others from my company, and already had training on an interior and an exterior project the month prior.

This day could not go any worse! I was discouraged, and I began to question my ability as a manager.

Timothy J. Tetreault

Here is why I believe that every student should run their own painting company:

You Learn Patience

“Patience is bitter, but its fruit is sweet”


Starting out in student painting taught me a lot of techniques to keeping composure and handling issues. It threw me into the industry with little life or industry experience.

I started working back in highschool as a courtesy clerk for Sobey’s (Canadian grocery store). My job description was to push shopping carts back into the store after customers were finished as well as bagging groceries. Within three years, I was working as a cashier, and there was talk among the upper ranks of putting me in a supervisory position. One day, I walked into my political science class, and found a flyer sitting there: “Manage your own company this summer.” I applied, interviewed, and got the job!

After training, I figured that I had to hit the ground running. I had ~$10,000 saved up in my government Tax Free Savings Account (TFSA) account, and I began shopping for a vehicle to run my business from.

I wasn’t going to allow my lack of a vehicle to stop me right away however. The dealership where I eventually purchased my 2011 GMC Sierra is located nearby the location that I wanted to start my cold calling.

Cold calling is the best way to find new clients for your business. That is what I was told during training – but historically I have been very shy. In order to be successful in this industry meant that I had to step outside of my comfort zone.

I started knocking on doors in my neighborhood, and learned very quickly that this would require more patience than I had anticipated. The first homeowner essentially told me to “get lost” – and slammed the door in my face. The second, third, and forth ones weren’t home. The fifth one told me that she was interested, but then when I went to call her, I realized the phone number she had given was a fake.

I was discouraged, and by the time I had reached the end of the street, I was ready to pack it in for the night.

I started to walk back to my car (a 2004 Chevy Cavalier) parked at the start of the street. There is a highschool and a field on this particular street, so I assumed that It would not be worth my time to knock on the few houses beside the school. I had left a sign out on the side of the road, and one of those residents – an elderly woman approached me as I got near my car.

The elderly woman explained to me that she was doing some gardening that week and had noticed that both her fence, and her window frames had begin to peel and she asked if I could give her a price on repainting those areas. I was astonished; hours of looking for prospective clients with no results, and just when I am ready to give up – one appears!

I did the quote (later I would learn that it was a bit low), and Dorothy signed on the spot, becoming my first ever client!

Before I left, I decided to knock on the doors of her 5 neighbors. The first two were not home. I left that evening with 3 more leads from those houses (1 would eventually sign – a living room and kitchen interior).

I realized that day that cold calling follows the rules outlined in the law of averages. The law of averages essentially states that any particular outcome (regardless of odds; provided that it is greater than 0%) is inevitable given a large enough sample size.

In my experience that day, I realized that while doing cold calling, you cannot be discouraged when 100 people turn you away, because the 101th, 102nd, and 103rd doors that you knock could be the job that you end up signing.

I realized that the Law of Averages transfers into other areas of life as well:

  • If you are single, you need to meet many different people in order to find somebody compatible. This may require several bad dates, but then eventually one good one will happen.
  • If you are a highschool graduate applying to a university, you apply to many universities to increase your chances of being admitted.
  • When gambling, it is inevitable that you will win any particular game if you play it enough times. In this case, the law of averages is a major driver in gambling addictions

Doing student painting you also learn how to remain calm and composed when the client may not be. I have people take frustrations out on me, and get angry towards me, and view me as nothing more than their pawn. Being a student painter, many clients assume that you are inexperienced, and that they are smarter than you. At first this behaviour got under my skin, but I learned not to take it personally. I learned that just because a particular client is upset about a matter, they are generally still willing to speak to you and find ways to resolve the issue.

Patience is an important trait to have in day to day life because it helps people deal with conflict, and it can also improve a person’s work ethic.

You Learn Sales Techniques

If you had approached me five years ago and told me that I would become an excellent salesman, I would have chuckled and told you “yeah right.”

Student painting has allowed me to learn first hand the importance of different sales techniques.

Fortunately I learned patience early on – it is an important trait to have when it comes to sales. I learned that when making a sale, the client will usually have objections. I started viewing these objections as an opportunity as opposed to the client not being interested. I am now able to use the objection to help make a sale and build value in a client’s life.

Student painting is historically known as being a summer job for students to help pay for textbooks (think Tom Sawyer), but in actuality – it is so much more. Students run legitimate businesses, and like any business, the goal is to grow and provide as much value to clients as possible.

I would argue that aside from extremely difficult projects, the quality that a student is able to achieve is comparable to professional and more established painting businesses.

Students are often flexible in their scheduling because the crews do not generally have children, or dependent families. This means that a student painting company can more easily accommodate for evening scheduling, or other client needs.

For example, here are some popular objections that I received and how I learned to address them:

“It is a bit expensive”Price based selling: “where do you need the price to be in order to move ahead with this project.”

Value based selling: “Is the price high based on your budget for this project, or based on the value we present.”
“I need to talk to my husband/wife”“If your husband/wife is comfortable moving ahead with this job, would you also be comfortable with getting this work done?”
“I need to get a few other quotes first”“Absolutely, we always recommend doing that to ensure that you are getting the fairest price. If you have any questions about my proposal or it is unclear, my number is at the bottom. Don’t hesitate to call, and I will do my best to make this work for you!”

By running a student painting business, I tried different sales tactics, and built value in different ways. Some techniques worked very well (and I implemented those) and others did not so much. I have tried fancy closing statements only to find myself tripping over my own words and dramatically faceplanting right back to knocking on more doors.

You Learn Marketing

In our world, marketing is everywhere. This was one of the biggest challenges starting out and was very demotivating. How was I supposed to compete as the new guy in an already saturated market. Most of my competition have made careers in painting, and here I was as the student. There were other students running businesses as well, but this made my niche market not as formidible.

In student painting, the primary target demographic is seniors. This is because seniors generally require assistance on labour based jobs, and they support young people getting an education. Often times, seniors have disposable income, but generally spent most of their lives in the middle-class demographic so they often are price sensitive.

In Canada, seniors are a fraction of the total market however, so I had to share this demographic with other student painting companies. Generally, seniors tended to choose student painting over professional painters, and the professional painters tend to stick with newer builds and larger projects.

I began searching for a more specific market niche to build my business around. Student residential painting was somewhat saturated, so I began looking towards commercial painting. Residential painting is much more abundant, but commercial painting jobs tend to be larger and focus less on detail. They tend to paint buildings with a more practical intent – to protect the surfaces from weathering and damage.

Soon after searching for commercial jobs, I found several interested customers. The first one I signed – a 3 story office building in downtown Calgary, ended up being my last project of that season. The job value was just shy of $6000, which was about 2.5x my average residential job size. The next spring, I continued to market to commercial businesses and ended up painting a brick wall (see photo) in downtown Cochrane on the back of a hair salon. I also did quotes on the Cochrane Golf Club and various businesses within Calgary including a Pizza Hut and an office complex just outside of the core.

I learned very quickly the importance of brand awareness and ensuring that your logo gets seen often. I began to incorporate flyer delivery in my routine cold calling activities and I tracked the results. I cold called 250 houses without delivering any flyers and left with 13 leads. A week later I cold called another 250 houses in the same neighborhood, and ended up with 23 leads – a 77% increase.

Facebook was one of the avenues that I experimented with, but I did not see any results until I tailored my message a bit. At first, I used a Facebook marketing campaign to drive leads, but I found that my impressions to click through rate was very low. Instead I began to focus my marketing and paid to sponsor advertisements about a day after I flyer a particular region. This helped dramatically in signing jobs and creating a brand awareness.

Once I bought my truck, I realized that I was driving a potential marketing machine! I purchased some vehicle magnets from our head office in Halifax, and I got to work carving the magnets up work with my chrome trim package. By the time I was finished, I was probably one of the most recognizable vehicles in Calgary. And it worked! Calls began to pour in throughout the regions of the city that I frequented, and just seeing the truck made our brand recognizable

Referrals became my best marketing. At the end of the season, I had stopped door to door marketing, and flyering entirely and I operated my business off of referrals. Clients from earlier in the year shared the amazing projects that I completed, and new clients poured in. I ended up signing the biggest project of my life towards the end of the season from a referral. It was a full exterior of a luxury home near Calgary. This project alone ended up covering my expenses through the fall and winter.

Working for somebody else, you always question why some managers crack down on customer service so hard. As a business owner, you learn that projects are easier when the client is happy, and you find other projects fairly easily.

You Learn Human Resources

Most students are working for other people outside of their educations, and the issue with this is that it only teaches you one side of the equation.

There are a lot of people in the workforce that have no idea how to manage a team – let alone recruit, train, and fire. I have worked various other jobs as an employee since leaving student painting, but they all handle human resources very similarly.

A company’s employees are arguably the most important resource, and an effective manager is able to utilize them to ensure that all goals get met. an effective human resource program will motivate employees to meet organizational goals, it will discipline employees that fail to meet these goals, and it will encourage healthy working environments.

As a result, human resources are one of the most important aspects to running any business – making these skills transferable outside of student painting.

I learned a lot of human resource skills the hard way. I was destined for issues from day 1. My first employee that I had hired was my best friend of 12 years at the time.

Him and I grew up together, and we knew each other very well. He was unemployed, and I was looking for employees so it seemed logical at the time to hire him. I ended up also hiring three other friends of mine. I had set myself up perfectly to have human resource issues.

The issue with hiring friends is that it can come between the friendship. Discipline is nearly impossible when the employee does not view you as their manager – and an attempt to discipline will look bad on the manager. Hiring a friend also leads to motivation issues because they will see first hand that they are making $15/hr ($120/day) for working hard on a jobsite while you will pocket an average of $300-500 on that same job without touching a paint brush. This puts some tension in the friendship.

My second year student painting, I made another mistake. I decided in the spring to hire my girlfriend (now ex). She had just finished upgrading her high school, and was on the search for a full time job. We had been dating 3-4 months by this point, and I figured it was safe to offer her a job. I thought I had learned my lesson in the year prior, but apparently love clouds your judgement.

At first things were great, but I later learned that the work dynamic is part of what killed our relationship. Relationships function well when there is equal respect for each other. The boss-employee dynamic found its way into our relationship and it was difficult to separate the personal relationship from the professional one. I really enjoyed working alongside my girlfriend, but it was near impossible to address any issues while keeping it outside the personal relationship.

For example, she was super friendly (and clients really liked having her around), but she was a slow painter. I had talked with her numerous times about her speed, but I did so in a professional manner. I talked to her the same as I would any other employee. I believe that she expected me to talk to her as her boyfriend on jobsites, and this built some tension working together. The other employees also came to me and pointed out that they believed that I treated her differently than them – girlfriend privilege. We ended up breaking up shortly after the painting season had ended and I had closed the company, but I learned a valuable lesson from it: do not hire people you care about if you are the direct line of contact.

I could see working with a friend/significant other going smoothly if:

  • You are both equal in ranking
  • You are both in different departments from each other and nobody has authority over another
  • You met in a working environment, and have developed a mutual respect for each other.

Discipline is also a fundamental component of human resources. When it is done properly, you can redirect undesirable behavior to change it into productive behavior. When done incorrectly, it can actually harm productivity and lead to high employee turnover and demotivated employees.

Early on, I had never managed a team before. I was a cashier at Sobeys, and never actually had any employees reporting to me. As a result, my discipline style early on was either non-existent, or aggressive. I didn’t want to enforce the company policies out of fear of what the employee may think of me. When I occasionally did try to correct behavior I did so in the wrong ways. I would tell the employee that their behavior is undesirable without coaching them methods to resolve the issue.

I eventually learned that employees actually respect managers more for pointing out issues and coaching them to improve. If a person is willing to take the time out of their day for someone else, then it shows that they matter to the company. I learned patience when dealing with problems, and I began to build trust among my employees – and got better quality results to show for it.

Lastly, I learned how to be able to motivate other people. I learned how to make them feel like they are an important part to a bigger goal. I learned how to make every employee feel valued in my organization.


Since doing student painting, I have learned patience, sales, marketing, human resources, and just generally how to provide a better customer experience. I have tried many different techniques, sometimes failed, and tried other things and succeeded. I have learned how to manage a jobsite and a team of employees.

These skills have transferred into other areas of my life. I can now present with confidence, and I have had many opportunities open up as a result of my knowledge.

I still have a lot to learn, but compared to others my age, student painting has put me miles ahead of any of them.

This is why I believe that every student should run a painting business at some point of their academic career.

No comments to show.